CR6034A Switch II Turntable Instruction Manual Questions, problems, missing parts? Before returning to the store, call Customer Service 8 a.m. – 6 p.m., EST, Monday – Friday 1-888-CROSLEY www.crosleyradio.
English Safety Instructions Read and understand this entire manual before using this product. Keep these instructions for future reference. 1. Do not use this product near water. 2. This product should be operated only by the type of power source indicated on the marking label or in this instruction manual. 3. Do not defeat the safety purpose of the polarized plug. A polarized plug has two blades with one blade wider than the other. This plug will fit into the power outlet only one way.
English Items in this package Before throwing away any packaging materials, please check thoroughly and make sure you find the following items that come along with this package: Turntable Speakers Turntable slip mat 45 RPM adapter Speaker wire 3.5mm aux in cable Power adaptor Please contact Crosley customer service if there is any accessory missing from the package. Retain the original packaging materials for exchange or return purposes.
English Product Description 1. 2. 3. 4. 5. 6. 7. 8. 9. Speaker Power / Volume Knob Speed Switch Function Switch Headphone Jack Aux In Jack Tuning Knob Turntable Platter Turntable Spindle 10. Pitch Control 11. Cue Lever 12. Tonearm Rest 13. Hold Down Clip 14. Tonearm 15. Spring clip speaker terminals 16. Power Jack 17.
English Initial Setup Essential Setup 1. Place the unit on a flat and level surface. The selected location should be stable and free from vibration. 2. Remove the tie-wrap that is holding the tonearm. 3. Place the slip mat on top of the turntable platter. 4. Connect the speakers to the Spring clip speaker terminals of the turntable. 5. Connect AC adaptor to the Power Jack of the unit. Note: Do not plug the AC power adaptor to power outlet before all the assembly is completed.
English 9. When the record is finished playing, use the Cue Lever again to raise the tonearm and then return it to the Tonearm Rest. Release the lever to let the tonearm sit back at its rest. To suspend the playback, repeat the same steps. 10. Lock the Tonearm Clip to secure the tonearm. Pitch Control The turntable speed can be increased or decreased by approximately 10% by rotating the Pitch Control Knob. To increase the speed, turn the Pitch Control Knob clockwise.
English The AM antenna is built inside the unit. If AM reception is poor, try to rotate the unit for better reception. Bluetooth Operation 1. Turn the Function Switch to Bluetooth mode , you will hear an activation sound from the unit. 2. Turn on the Bluetooth feature of your audio device, search for “CROSLEY CR6034” and pair. 3. Once your device is successfully paired with the unit, you will hear a short confirmation sound from the unit. 4. Play and stream music from your device to the unit.
English Troubleshooting There is no power Power adaptor is not connected correctly. No power at the power outlet. To help save power consumption, some models will comply with ERP energy saving standard. When there is no audio input for 20 minutes, their powers will automatically cut-off. To turn power back on and resume playing, turn off the power and turn it on again. Power is on, but the platter does not turn Turntable mode is not selected. Turntable’s drive belt has slipped off.
