CR6037A RSD3 Mini Turntable Instruction Manual Questions, problems, missing parts? Before returning to the store, call Customer Service 8 a.m. – 6 p.m., EST, Monday – Friday 1-888-CROSLEY www.crosleyradio.
English Safety Instructions Read and understand this entire manual before using this product. Keep these instructions for future reference. 1. Do not use this product near water. 2. This product should be operated only by the type of power source indicated on the marking label or in this instruction manual. 3. Do not defeat the safety purpose of the polarized plug. A polarized plug has two blades with one blade wider than the other. This plug will fit into the power outlet only one way.
English Items in this package Before throwing away any packaging materials, please check thoroughly and make sure you find the following items that come along with this package: Turntable Turntable Lid Record adapter x 2 Power adaptor Aux In Cable 3.5 MM to RCA Please contact Crosley customer service if there is any accessory missing from the package. Retain the original packaging materials for exchange or return purposes.
English Product Description 1. 2. 3. 4. 5. 6. Turntable Spindle Turntable Platter On/Off-Volume Knob Power Indicator Headshell Pitch Control 7. Tonearm Rest 8. Tonearm 9. Record Adapter 10. Headphone/Aux Out Jack 11.
English Turntable Operation 1. Place the record on the turntable. Use the Record Adapter if necessary. 2. Rotate the On/Off Volume Knob to turn on the power. 3. Remove the stylus protector from the stylus assembly. Note: To avoid stylus damage, make certain the included stylus guard is in place whenever the turntable is being moved or cleaned. 4. Lift tonearm from the tonearm rest. Note: When the turntable is not in use, remember to secure it to the tonearm rest. 5.
English Needle Replacement Removing Needle 1. Gently pull down the front edge of the needle. 2. Pull needle forward. 3. Pull out and remove. Installing Needle 1. Position the needle with its tip facing down. 2. Line up the back of the needle with the cartridge. 3. Insert the needle with its front end at a downward angle and gently lift the front of the needle upward until it snaps into place.
