CR7002A Troubadour Instruction Manual www.crosleyradio.
IMPORTANT SAFETY INSTRUCTION General General LIMITED MANUFACTURERS WARRANTY Crosley Radio, Inc. warrants the product to be free from defects in material and workmanship under normal use for a period of one year from the original date of purchase. This warranty is not transferable. If the product is determined to be defective during the warranty period, the unit will be repaired or replaced at Crosley Radios sole discretion.
WARNING: General TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DO NOT REMOVE COVER. PILOT LAMPS SOLDERED IN PLACE. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER - SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Audio / Connections Welcome Thank you for purchasing the Crosley Troubadour (CR7002A). Before operating this unit, please read this manual thoroughly and retain it for future reference. AUX INPUT AUX IN Using the Aux Input allows you to hook up additional external audio components and listen to them through your unit. Any component with an audio output such as a Tuner, can be connected by using the correct cables (included). This unit uses standard RCA cables.
USB/SD Operation Getting Started Unpacking 1 Remove packing materials from unit. Note: Save all packing materials 2 AC Adaptor and Remote Control are located on the outside of the Styrofoam packaging. 3 Remove plastic bag covering radio and remote control. 4 Untie antenna wire on back of radio. 5 Open lid and remove Styrofoam shipping material from turntable. 6 Remove black tie-wrap from under the TONE ARM 7 Remove white protective needle cover by gently pulling towards the front of the unit.
USB/SD Operation Control Locators SPEAKERS USB Playback Follow the instructions below to play audio MP3 files stored on a USB Flash Drive. 1 Press the FUNCTION / USB mode. 2 Plug-in USB mass storage device. READ is displayed as the system scans the contents of USB device. to set the unit to 6 Press STOP/BAND / to stop playback. Notes: 1) USB connector does not support connection with USB extension cable . 2) This unit is not designed for communication with computer directly.
Control Locators CD Operation Playing a CD 1 Press the FUNCTION / mode. 2 Press CD OPEN / CLOSE / compartment 3 Insert a disc with the printed side facing up. Press CD OPEN / CLOSE/ . again to close the compartment, READ is displayed as the CD player scans the contents of a disc. CASSETTE DOOR EJECT /F.F. 4 Press PRESET + / or PRESET / select desired album. 5 Press STOP/BAND / to set the unit to CD to to stop playback.
Basic Operation Basic Operation Accessory: ADAPTER FOR 45 RPM Turntable PREPARING TO USE THE TURNTABLE 1 Lift up lid and remove black tie-wrap by untwisting and gently sliding out from TONE ARM . 2 Remove cardboard shipper. 3 Remove white protective needle cover by gently pulling towards front of unit. 4 Release TONE ARM and hold-down clip by gently pushing to the right. This will unlock tone arm from its ARM REST .Re-lock the hold-down clip when moving the unit to another location.
Basic Operation Basic Operation 11 Note: The wake up sound level will be increased gently to preset volume level. 12 Press TIMER / on the remote control to turn on/off the timer. The icon " " will be on/off respectively. Sleep Sleep mode allows the unit to operate for a pre-set amount of time, and then automatically turns off.