CR7014A Eclipse Entertainment System Instruction Manual Questions, problems, missing parts? Before returning to the store, call Customer Service 8 a.m. – 6 p.m., EST, Monday – Friday 1-888-CROSLEY www.crosleyradio.
English Safety Instructions Read and understand this entire manual before using this product. Keep these instructions for future reference. 1. Do not use this product near water. 2. This product should be operated only by the type of power source indicated on the marking label or in this instruction manual. 3. Do not defeat the safety purpose of the polarized plug. A polarized plug has two blades with one blade wider than the other. This plug will fit into the power outlet only one way.
English Items in this package Before throwing away any packaging materials, please check thoroughly and make sure you find the following items that come along with this package: Turntable Remote Speakers Please contact Crosley customer service if there is any accessory missing from the package. Retain the original packaging materials for exchange or return purposes.
English Product Description 1. 2. 3. 4. 5. 6. 7. 8. Dust Cover LCD Screen Bluetooth Indicator Cassette Door Record Button Play Button Rewind Button Fast Forward Button 9. Stop/Eject Button 10. Pause Button 11. CD Tray 12. SD Card Slot 13. USB Port 14. Aux In Jack 15. Headphone Jack 16.
English 17. AM Button 18. FM Button 19. Record Button 20. Delete Button 21. Program Button 22. Repeat Button 23. Play/Pause Button 24. Phono/Aux/Bluetooth Button 25. Stop Button 26. CD Button 27. Backward Skip Button 28. Forward Skip Button 29. Tape Button 30. USB/SD Button 31. On/Off-Volume Knob 32.
English 33. Turntable Spindle 34. Turntable Platter 35. 45 RPM Adapter 36. Tonearm Lever 37. Auto Stop Switch 38. Hold Down Clip 39. Tonearm Rest 40. Speed Switch 41. Tonearm 42. RCA Jacks 43. Spring Clip Speaker Terminals 44. FM Wire Antenna 45.
English Remote Control 46. Program Button 47. Repeat Button 48. Mode Button 49. Mute Button 50. Play Pause Button 51. Record Button 52. Stop Button 53. Backward Skip Button 54. Forward Skip Button 55. Folder Down Button 56. Folder Up Button Initial Setup Essential Setup 1. Place the unit on a flat and level surface. The selected location should be stable and free from vibration. 2. Remove the tie-wrap that is holding the tonearm. 3.
English Stereo System Connection RCA Jacks The RCA Jacks output analog line-level signals and could be connected directly with a pair of active/powered speakers or the appropriate input of your stereo system. The Red plug connects with the Right channel and the White plug connects with the Left channel. Note: The RCA Jacks are not designed to be connected directly to the passive/unpowered speakers. If connected to the passive speakers, the volume level will be very low.
English 9. When the record is finished playing or to suspend the playback, use the Tonearm Lever again to raise the tonearm and return it to the Tonearm Rest. Release the lever to lower the tonearm back to its rest. 10. Lock the Tonearm Clip to secure the tonearm. Platter Auto-stop If the Auto-stop Switch is set to ON position, the platter will stop spinning automatically when the record plays to the end.
English Radio Operation 1. Rotate the On/Off Volume Knob to turn on the power. 2. Press the AM Button or FM Button to the desired band. 3. Rotate the Tuning Knob for desired radio station. Note: The unit is equipped with a FM wire antenna. To improve FM reception, fully extend and move the wire around until the reception is clear without interferences. Do not connect the wire to any additional antenna. The AM antenna is built inside the unit.
English 8. To repeat a specific track, press Repeat button once while that track is playing. To repeat all the tracks, press the Repeat button twice. To repeat random tracks, press the Repeat button three times. To cancel repeat function, press the Repeat button. 9. Press the Stop button if you want to completely stop playback. Programmed Playback 1. Press the Stop Button before starting, press the Program button once to enter program mode. Program Indicator will start flashing.
English Cassette Recording RADIO to TAPE 1. Press the AM Button or FM button to the desired band. 2. Insert a cassette tape, and press the RECORD and PLAY button to record the sounds from the radio. Note: To prevent accidental recording, break off the cassette tab from side A or B. 3. To pause recoding, press the Pause button. Press it again to resume playback. 4. To stop recording, press the Stop/Eject button. USB/SD to TAPE 1. Press the USB/SD button to set the unit to USB or SD mode. 2.
English 4. To pause recoding, press the Pause button. Press it again to resume playback. 5. To stop recording, press the Stop/Eject button. PHONO to TAPE 1. Press the Phono/AUX/ button and set the unit to phono mode. 2. Lower the tone arm to start playback of the record. 3. Insert a cassette tape, and press the RECORD and PLAY button to record the sounds from record. Note: To prevent accidental recording, break off the cassette tab from side A or B. 4. To pause recoding, press the Pause button.
English 5. To pause recoding, press the Pause button. Press it again to resume playback. 6. To stop recording, press the Stop/Eject button. AUX IN to TAPE 1. Connect the 3.5mm auxiliary cable between your audio device and the Aux In Jack of this unit 2. Press the Phono/AUX/ button to set to Aux In mode, and start playing. 3.
English Folder/Album Playback If your USB or SD is separated into folders, follow the steps below to access the folders. 1. While the device is stopped, press the Folder Up or the Folder Down buttons on the remote to advance forward or backwards through the folders. 2. Once the desired folder is reached, use the Forward Skip or the Backward Skip buttons to select the desired track. 3. Press the Play button to begin playback of the selected track.
English USB/SD Recording RADIO to USB/SD RECORDING 1. Press the AM or FM button to the desired band. 2. Insert a USB device or an SD memory card and press the record button. 3. Press the Backward or Forward Skip button to select USB or SD for recording, and press the record button to confirm the desired media. 4. When you have finished recording, press the Stop button. CASSETTE to USB/SD RECORDING 1. Press the Tape button and set the unit to Tape Mode. 2.
English Bluetooth to USB/SD RECORDING 1. Press the Phono/AUX/ button and set the unit to Bluetooth mode. 2. Turn on the Bluetooth feature of your audio device, search for “CROSLEY CR7014A” and pair. 3. Insert a USB device or an SD memory card and press the record button. 4. Press the Backward or Forward Skip button to select USB or SD for recording, and press the record button to confirm the desired media. 5. Play and stream music from your device to the unit. 6.
English FCC Statements This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
