User's Manual

Product Description
1. Turntable Platter
2. Turutable Shaft
3. Tonearm
4. Tonearm Lever
5. Auto-stop Switch
6. Speed Switch
7. Hold Down Clip
8. 45 RPM Adaptor
General Operation
Essential Setup
1. Connect the Left and Right speakers to OUT-L/OUT-R jacks at the back of the unit.
2. Place the speakers on a flat and level surface. The selected location should be stable and free from vibration.
3. Remove the tie-wrap that is holding the tonearm.
4. Plug the power cord to unit firstly and then plug the adapter to wall power outlet.
5. Hold and press the “ /MODE” button to turn on the unit. And short press the “ /MODE” button to select the desired mode.
Bluetooth In Operation
9. AUX IN Jack
10. Power/Mode Button
11. USB Port
12. Previous Section/ Previous Station
13. Record Button
14. Next Section/Next Station
15. Play/Pause
16. Volume Knob
17. LED Display
18. Left/Right Speaker Jack
19. FM Antenna
20. Audio Output Jack
21. Power Input Jack