A B C Cam bolt 11 PCS H Drawer pull 10 PCS 2 PCS J F E Wood Dowel 11 PCS I D K G Allen Bolt Allen wrench 8 PCS 1 PC 4 PCS L M 2 PCS 2 PCS Screw 16 PCS Shelf holder Towel bar Castor With Brake Castor Without Brake 4 PCS 1 PC 2 PCS 2 PCS 2 PCS 2 PCS 1 PC 1 PC EXTRA Page 2
Step 1. Insert Cam Bolts (B) into pre-drilled holes of parts (1, 2, 3, 5 & 6) using a Phillips head screwdriver. DO NOT OVERTIGHTEN. & Step 2. Lay Back Panel (6) on a flat surface with Cam Bolt (Part B) facing up. Attach Right Side Frame (3) to Back Panel (6) using Cam Locks (A) & Wood Dowels as shown. Now attach Right Side Frame (3) to Bottom Panel (4) using Allen Bolts (F) as shown. Repeat the previous steps for Left Side Frame (2).
Step 3. Attach Partition Panel (7) to Back Panel (6) using Cam Lock (A) & Wood Dowel (C) as shown. Note - Be sure the wheels on the drawer glide are facing the front of the cabinet. Now attach Front Frame (5) to Partition Panel (&) using Cam Lock (A) & Wood Dowel (C) as shown. Attach Caster with brake (L) & Caster (M) to Right & Left Side Frames (2 & 3) by rotating clockwise. 5 point arrow on cam lock to ward adjacent hole C 3 A 7 A L 6 C 1/2 tum clockwise to fasten 2 M 4 M L Step 4.
Step 6. Insert the assembled drawers into the cabinet. 1 2 4 Step 7. Insert the Shelf Holders (I) into the desired location and add Adjustable Shelf (13). Note - If you intend to use the lower portion of the island for stool storage, do not add adjustable shelf (13).Congratulations! You are finished.