Outdoor Wicker Corner Chair CO7147
PART LIST A C B Arm Panel 1 PC Back Panel 1 PC Cover of Seat Cushion * 1 PC Seat Panel 1 PC H G F Core of Seat Cushion 1 PC E D Front Panel 1 PC J I Cover of Back Cushion * 1 PC Side Panel 1 PC Cover of Side Cushion * 1 PC Core of Back Cushion 1 PC K *Please note cushion covers will ship separately.
Step 1. Lay arm panel (part A) down on a soft flat surface, such as carpet, as shown below. Attach back panel (part B) to arm panel (part A) using medium bolts(part #2), washers (part #5),nuts(part #4),wrench(part #6) and allen key (part #7). NOTE:Please do not fully tighten bolts until unit is fully assembled. #7 #2 #5 #5 #4 #6 #2 #4 #5 #6 #7 Step 2.
Step 3. Attach front panel (part D) to arm panel (part A) and seat panel (part C) using short bolts (part #1), long bolts (part #3),washers (part #5) ,nuts (part #4), wrench (part #6) and allen key (part #7). NOTE:Please do not fully tighten bolts until unit is fully assembled. #7 #3 #5 #1 #7 #5 #5 #4 #6 #1 #3 #4 #5 #6 #7 x1 x2 x2 x5 x1 x1 Step 4.
Step 5. Screw adjustable levelers (part #8) to desired position in the pre-drilled holes on the bottom of the chair where shown. #8 #8 Step 6.Insert core of seat cushion ( part G ) into cover of seat cushion ( part F). Insert core of back cushion (part I) into cover of back cushion (part H). lnsert core of side cushion (part K) into cover of side cushion (part J).
Step 7.Carefully turn the assembled chair upright and add cushions as shown below. Step 8.Use plastic clips (part #9) to secure additional units together as shown.
