Outdoor Wicker Swivel Rocker Chair CO7152
Q P *Please note cushion covers will ship separately.
Step 1. Lay Arm Panel (A)down on a flat surface. Attach Back Panel(B) to Arm Panel(A) using the Medium Bolts(I), Washers(L), Nuts(K), Wrench(M) & Allen Key(N). NOTE: Please do not fully tighten bolts until unit is fully assembled. Step 2.
Step 3. Attach Lower Front Panel (D) to Arm Panel (A) using the Long Bolts(J), Washers (L), Nuts(K), Allen Key (N) & Wrench (M), to Seat Panel (C) using Short Bolts (H), Washers (L) & Allen Key (N). Step 4. Attach the other Arm panel(A) to the assembled Parts (A,B,C&D) using Medium Bolts (I),Long Bolts (J),Washers (L),Nuts (K),Wrench (M) and Allen Key (N) as shown.
Step 5. Screw the Adjustable Levelers(O) into the pre-drilled holes on the Base(E).Attach Base(E) to the Seat Panel(C). Step 6.Insert core of seat cushion ( part G ) into cover of seat cushion ( part F). lnsert core of back cushion (part Q) into cover of back cushion (part P).
Step 6. Place Seat Cushion and Back Cushion on the Chair.
