Outdoor Wicker Ottoman CO7149
PART LIST A C B Wicker Top 1 PC Side Panel 2 PCS D End Panel 2 PCS E Cover of Seat Cushion * 1 PC *Please note cushion covers will ship separately.
Step 1. Lay wicker top (part A) on a soft flat surface, such as carpet, as shown below. Attach side panel (part B) to top panel (part A) ,and then also attach end panel (part C) to side panel (part B) and top panel (part A) using bolts (part #1), washers (part #2) and allen key (part #3). NOTE:Please do not fully tighten bolts until unit is fully assembled. #3 #2 #1 #1 #2 #3 x4 x4 x1 Step 2.
Step 3. Screw adjustable levelers (part #4) to desired position in the pre-drilled holes on the bottom of the chair where shown. #4 #4 x4 Step 4.Insert core of seat cushion ( part E ) into cover of seat cushion ( part D). E D Step 5.Carefully turn the assembled chair upright and add cushions as shown below.
