Outdoor Wicker Arm Chair CO7155
PART LIST A C B Right Arm Panel 1 PC Left Arm Panel 1 PC E D Back Panel Seat Panel 1 PC 1 PC Seat Cushion 1 PC F Back Cushion 1 PC HARDWARE LIST #1 #2 #3 M6*65mm M6mm Bolt Washer 12 PCS 24 PCS #4 M6mm M6mm M6mm Nut Allen Key Wrench 12 PCS 1 PC 1 PC EXTRA HARDWARE LIST #1 #2 #5 #3 M6*65mm M6mm M6mm Bolt Washer Nut 1 PC 1 PC 1 PC 2
Step 1. Lay back panel (part C) down on a soft flat surface,such as carpet,as shown below. Attach right arm panel (part A) to back panel (part C) using bolts(part #1),washers (part #2),nuts(part #3),wrench(part #5) and allen key (part #4). NOTE:Please do not fully tighten bolts until unit is fully assembled. #2 #3 #5 #2 #4 #1 A C #1 x2 #2 x4 #3 x2 #4 #5 x1 x1 Step 2.
Step 3. Attach seat panel (part D) to assembled unit (parts A,B&C) using bolts(part #1),washers (part #2),nuts(part #3),wrench(part #5) and allen key (part #4). NOTE:Please fully tighten all bolts at this time. #2 #5 #3 #2 #1 #4 D A B C #1 x8 #2 x16 #3 #4 #5 x8 x1 x1 Step 4. Carefully turn chair upright.Place seat cushion (part E) and back cushion (part F) on the chair.