Outdoor Wicker Ottoman CO7143
PART LIST A C B Wicker Top 1 PC Side Panel 2 PCS D End Panel 2 PCS E Cover of Seat Cushion * 1 PC Core of Seat Cushion 1 PC *Please note cushion covers will ship separately.
Step 1. Lay wicker top (part A) on a soft flat surface, such as carpet, as shown below .Attach side panels (part B) to top panel (part A) using short bolts (part #1),washers (part #3) and allen key (part #7). NOTE:Please do not fully tighten bolts until unit is fully assembled. #7 #1 #3 B A B #1 #3 #7 x4 x4 x1 Step 2. Attach end panels (part #C) to assembled unit (parts A&B) using short bolts (part #1), washers (part #3) and allen key (part #7).
Step 3. Attach L feet (part #8) to assembled unit (parts B&C) using long bolts (part #2),small washers (part #4),nuts (part #5),wrench (part #6) and allen key (part #7). NOTE: Please fully tighten all bolts at this time. #7 #8 #2 #4 #5 #6 B C A C B #2 #4 #7 #8 #5 #6 Step 4.Insert core of seat cushion (part #E) into cover of seat cushion (part #D).
Step 5.Carefully turn the assembled ottoman upright and add cushions as shown below.
