T400D T400 Turntable Instruction Manual Questions, problems, missing parts? Before returning to the store, call Customer Service 8 a.m. – 6 p.m., EST, Monday – Friday 1-888-CROSLEY www.crosleyradio.
English Safety Instructions Read and understand this entire manual before using this product. Keep these instructions for future reference. 1. Do not use this product near water. 2. This product should be operated only by the type of power source indicated on the marking label or in this instruction manual. 3. Do not defeat the safety purpose of the polarized plug. A polarized plug has two blades with one blade wider than the other. This plug will fit into the power outlet only one way.
English Items in this package Before throwing away any packaging materials, please check thoroughly and make sure you find the following items that come along with this package: Turntable Turntable Lid Turntable Platter Turntable Slip Mat 45 RPM Adapter Power Adaptor Please contact Crosley Customer Service if there is any accessory missing from the package. Retain the original packaging materials for exchange or return purposes.
English Product Description 1. 2. 3. 4. 5. 6. 7. 8. 9. Hinges 45 RPM Adapter Turntable Platter Turntable Spindle Size Selector Tonearm Hold Down Clip Speed Selector Start Button 10. Stop Button 11. Lift Button 12. Bluetooth Indicator 13. Bluetooth Button 14. Phone Line Switch 15. RCA Jack 16. Power Jack 17.
English Initial Setup Essential Setup 1. Place the unit on a flat and level surface. The selected location should be stable and free from vibration. 2. Install the turntable lid to the hinges. 3. Remove the tie-wrap that is holding the tonearm. 4. Install the turntable platter and drive belt accordingly. 5. Place the slip mat on top of the turntable platter. 6. Connect AC adaptor to the Power Jack of the unit. Note: Do not plug the AC power adaptor to power outlet before all the assembly is completed.
English Turntable Operation Automatic Operation 1. Press the ON / OFF Button to turn on the power. 2. Set the Size Selector to the appropriate record size. 3. Set the Speed Button accordingly. 4. Place the record on the turntable. Use the 45 RPM Adapter if necessary. 5. Remove the stylus protector from the stylus assembly. Note: To avoid stylus damage, make certain the included stylus guard is in place whenever the turntable is being moved or cleaned. 6. Release the tonearm Hold Down Clip.
English Needle Replacement Removing Needle 1. Gently pull down the front edge of the needle. 2. Pull needle forward. 3. Pull out and remove. Installing Needle 1. Position the needle with its tip facing down. 2. Line up the back of the needle with the cartridge. 3. Insert the needle with its front end at a downward angle and gently lift the front of the needle upward until it snaps into place. Bluetooth Streaming Operation 1. Turn on the Bluetooth mode of the Bluetooth speaker and prepare it for pairing.
English Turntable Maintenance 1. Do not touch the stylus tip with your fingers. Avoid bumping the stylus on the turntable mat or a record’s edge. 2. Clean the stylus frequently with a soft brush with a back-to-front motion only. 3. Clean the records to get rid of dust or grease with a record cleaning brush and record cleaning solution. 4. Clean the turntable lid and turntable cabinet with a slightly damped microfiber cloth.
English FCC Statements FCC Caution: 1. This device complies with Part 15 of the FCC rules/ Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. 2. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. 3.
