Manualshelf

Service Manual

ManualsBrandsCrosman ManualsAirgunsAll Models
111112113114115116117118119120
PAGE 15-D
DISASSEMBLY PROCEDURE FOR C0
2
REPEATER MODEL 400
Refer to Drawings Page 15.1-15.2-15.3
1. Remove Guard Stud Screw (150-13) Remove Stock (400-18).
2. Remove Front Sight (160-22).
3. Loosen Strap Screw (180-22).
4. Remove Breech Plug Screw (180-18) and Breech Plug (400-7).
5. Slide Breech Bolt to Rear and Remove Hold Down Screw (180-12) thru Hole in Top of Breech.
6. Slide Breech and Barrel Assembly to Rear. Magazine Ball (400-16), Magazine Ball Spring (400-17), Breech Gasket
(180-57), and Spacers (400-13), (400-14) may drop out.
TO REMOVE HAMMER AND EXHAUST VALVE ASSEMBLY REFER TO ITEM 6 - 7 - 8 PAGE 14-A UNDER MODEL 180-87