Service Manual

Page 17.C
12. Assemble Hammer Assembly 45-5. Index Spring must be wound to hold Index Hand against
Cylinder Assembly. When assembling hold Index Hand away from indexing lugs on Cylinder
Assembly so that Cylinder is not disturbed. The Hammer Assembly can be held in place by
using a 1/8" diameter by 2 inch long pin inserted in the tapped Hammer Screw hole.
13. Assemble Trigger Pin, 166-29, Trigger, 45-25 and Trigger Spring, 45-26.
14. Assemble Hammer Spring-, 45-24, to lower groove in casting. Extruded end of spring in
groove and extruded portion face up.
15. Assemble Retaining Screw, 45-30 and Retaining Nut, 45-31 in notch at muzzle end of gun.
16. Assemble Frame Assembly R.H., 45-3. Press halves of Frame together.
17. Assemble Frame Screws, 45-40 and 45-39. Assemble Hammer Screw 45-38 and
Lockwasher 140-89.
NOTE: Tighten screw nearest BB Retainer first.
18. Assemble Grips with Grip Screw 45-37.