Service Manual

PAGE 18.C
DISASSEMBLY PROCEDURE FOR MODEL CROSMAN SINGLE ACTION 6 PISTOL CONT'D.
11. Assemble Hammer Assembly 6-5. Index Spring must be wound to hold Index Hand against Cylinder
Assembly. When assembling hold Index Hand away from indexing, lugs on Cylinder Assembly so that
Cylinder is not disturbed. The Hammer Assembly can be held in place by using a 1/8" diameter by 2
inch long pin inserted in the tapped Hammer Screw Hole.
12. Assemble Trigger Pin, 166-29, Trigger 45-25, and Trigger Spring 45-26.
13. Assemble Hammer Spring, 45-24 to lower groove in casting. Extruded end of spring in groove and
extruded portion Face Up.
14. Assemble Retaining Screw, 45-30, and Retaining Nut, 45-31 in notch at Muzzle End of gun.
15. Assemble Frame R. H. 6-2. Press halves of frame together.
16. Assemble Frame Screws, 45-40 - 45-39. Assemble Hammer Screw 45-38 and Lock Washer 140-89.
17. Assemble Grips with Grip Screw 45-37.