Service Manual

PAGE 19 – E
TUBE GROUP (Cont’d.)
9. Turn Ring (600-29) 90 degrees and remove from Tube, at its Rear most position
10. Slide Hammer rearward and out of tube.
11. Insert (6 x 32) Screw into Retainer Pins (600-36). Screwing the (6 x 32) Screw in, lifts Retaining Pin up and out. Remove Two
(2) Retaining Pins.
12. Push Valve Assembly (600-30) forward out of Tube (600-67).
13. Unscrew and separate Valve Rear (600-33) from Valve Front (600-34) freeing Valve Stem Assembly (600-47), Valve Spring
(600-35), Spacer (600-68), Washer (150-74), Screen (45-45) and Filter (45-44), for removal, if not removed by Item 4 in Tube
Group.
MAGAZINE GROUP
1. Remove Sight Assembly (600-12), Cover Screw (600-24), Lock Washer (140-89) and Cover (600-23).
2. Remove Magazine Spring (400-25). CAUTION: Spring may fly out.
3. Unscrew Knob Screw (600-46) and remove Knob (600-45) from Follower (600-44) and slide Follower rearward out of Frame.
SAFETY GROUP
1. Unscrew and remove Grip Screw (600-53) freeing Grips (600-48) and (600-51) for removal.
2. Unscrew and remove Safety Screw (600-18).
3. Lift straight up on Safety Assembly (600-8) to remove.
BARREL
1. Unscrew and remove Set Screw (160-33).
2. Slide Barrel forward and out of frame.