Service Manual

Page 20A – 2
Modification Model V-350 – Slide Action BB Rifle:
This modification supercedes Page 20A-1. Insert this page in manual and remove Page 20A-1.
The V350-5 Pop Valve has been redesigned to improve performance. The new Pop Valve V350-5A is an assembly, consisting of
Pop Valve V350-5A and Nylon Cushion 350-39.
Broken or damaged Pop Valves must be replaced with the new design valve with cushion.
The Nylon Cushion is recessed to retain the Pop Valve Spring 350-12A.
NOTE: Before installing new Pop Valve in Barrel it is necessary to remove burr from shoulder of Barrel. A 1/4" drill is the best
tool to do this operation.
Installation is the same as previous Pop Valves - Refer to Page 20A.
NOTE: When reassembling Barrel Cap 350-4, secure assembly with a small amount of Loctite Grade C liquid sealant. Also use
a small quantity on Guide Screw 350-10.