Service Manual

PAGE 3-A
1. Remove Knurled Locating Screw Nut
from under stock.
Remove Stock.
2. Clamp Tube in protected Vise Jaws. Do not
put strain on Breech, breech side down.
Remove Spring Stop Screws (110-31).
Remove Spring Stop Bottom Screw (110-12).
Remove Hammer Spring Stop (105-24).
Remove Hammer Spring Guide (110-29).
Remove Hammer Spring (110-7).
Remove Hammer (110-20).
Remove Cocking Pin (113-59).
Remove Breech Bolt (114-6).
Remove Breech Bolt Lock Assembly (110-64).
3. For removing Valve System refer to
details Page 2-A, Item 5 and drawing Page 2.3
4. Drive out Front Sight Pin (110-15).
Remove Front Sight (105-26)
Remove Pump Assembly (140-74).
Refer to Drawing Page 3.1.
VALVE SYSTEM FOR AIR RIFLES----------------------------------- REFER TO DRAWINGS PAGE 2.3 AND DETAILS ON PAGE 2-A.
PUMP & LEVER ASSEMBLY------------------------------------------- REFER ..TO DRAWINGS PAGE 1.3 AND PAGE 1-F FOR MAL-
FUNCTions AND CORRECTIVE MEASURES.