Service Manual

PRODUCT IRREGULARITY INTERPRETATION
Most product irregularities of the Crosman C0
2
Pellgun Rifle and Pistol have been misinterpreted as "0" Ring
Leakers.
We have conducted tests in our plant of these so-called "0" Ring Leakers, and have found that in most cases
this can be easily corrected by re-cocking immediately after piercing the Powerlet to allow the valve to seat
and to eliminate total loss of gas. This action relieves the Hammer tension on the Exhaust Valve Stem until
such a time as the internal gas pressure can build up sufficiently enough to seat the Exhaust Valve firmly.
Prior to inserting the C0
2
Powerlet into the tube, a few drops of light machine oil is recommended as good
practice for internal lubrication, and to aid the "0" Rings in making an effective seal,