Service Manual

PAGE 9-A
DISASSEMBLY PROCEDURE FOR AIR PISTOLS - - - - MODELS 105-106 REFER TO DRAWINGS PAGE 9.2, 9.3, 9.4, 9.5
1. Refer to Items 1, 2, 3 on Page 10-A for removing Grip Frame Assembly, Hammer and Exhaust Valve Assembly.
2. Remove Front Sight Pin (l10-15), from Sight (105-26) and Pump Assembly from Compression Tube.
NOTE: This model was made with various Pump Levers when replacement is necessary Pump Lever (130-8) Page 9.4
should be used. Refer to drawing Page 1.3 (lower left hand portion) and Page 1-C, Item 2 for Cup Pump replacement
details.
Details for Valve System shown in Drawing on Page 9.3 are explained on Page 2-A. Breech, Compression Chamber
(105-23) and Chamber Locating Pin (105-22) are soldered to Tube. Leaks developed around Locating Pin and between
Breech and Tube may be repaired with soft solder.