Owner's Manual

Soft Air
Mini Electronic Machine Gun
(6 mm) Plastic BB
OWNER'S MANUAL
READ ALL INSTRUCTIONS AND WARNINGS IN THIS
MANUAL BEFORE USING THIS SOFT AIR GUN
Instructions in French included on reverse side.
Distributed by
Crosman Corporation
Routes 5 & 20
East Bloomfield, NY 14443
www.crosman.com
YOU AND OTHERS WITH YOU SHOULD ALWAYS WEAR SHOOTING GLASSES TO PROTECT YOUR EYES.
READ ALL INSTRUCTIONS BEFORE USING.
BUYERAND USER HAVE THE DUTY TO OBEYALL LAWSABOUTTHE USEAND OWNERSHIP OFTHIS SOFTAIR GUN.
Please read this owner's manual completely. Remember to treat this soft air gun with the same respect you
would a firearm.Always carefully follow the safety instructions found in this owner's manual and keep this
manual in a safe place for future use.
If you have any questions regarding your new soft air gun, please contact Crosman Customer
THIS SOFT AIR GUN IS INTENDED FOR USE BY THOSE 16 YEARS OF AGE OR OLDER.
This is not a toy. Adult supervision required. Misuse or careless use
may cause serious injury, particularly to the eye. May be dangerous up to
100 yds. (91.44 meters).
6. Maintaining Your Soft Air Gun
DO NOT MODIFY OR ALTER YOUR SOFT AIR GUN. Attempts to modify the soft air gun in
any way inconsistent with this manual may make it unsafe to use, cause serious injury and
will void the warranty.
If you drop your soft air gun, check to see that it works properly before you use it again. If
anything seems changed, like a shorter or weaker trigger pull, this may mean worn out or
broken parts. Call Customer Service at Crosman for assistance before using your soft
air gun again.
7. Reviewing Safety
Do not ever point the soft air gun at any person. Do not ever point the soft air gun at anything you
do not intend to shoot.
Always treat the soft air gun as though it is loaded and with the same respect you would a
firearm.
Always aim in a SAFE DIRECTION. Always keep the muzzle of the soft air gun pointed in a
SAFE DIRECTION.
Always keep the soft air gun "On Safe" until you are ready to shoot in a SAFE DIRECTION.
Always check to see if the soft air gun is "On Safe" and unloaded when getting it from another
person or from storage.
Always keep your finger off the trigger and out of the trigger guard until ready to shoot.
You and others with you should always wear shooting glasses to protect your eyes.
If your reading or prescription glasses are not safety glasses, make sure you wear shooting
glasses over your regular glasses.
Use .24 caliber (6 mm) plastic BBs only.
Do not shoot at hard surfaces or at the surface of water. The plastic BBs may bounce off or rico-
chet and hit someone or something you had not intended to hit. If the plastic BBs should happen
to hit a hard surface, do not reuse those plastic BBs because they could cause possible damage
to your soft air gun.
• Replace the backstop if it becomes worn. Place the backstop in a location that will be safe
should the backstop fail.
• Do not attempt to disassemble or tamper with your soft air gun. Call Customer Service at
Crosman Corporation for repair. Using unauthorized repair centers or modifying the function
for your airgun in any way may be unsafe and will void your warranty.
• Do not put the soft air gun away loaded. Make sure ALL of the plastic BBs are unloaded
from the soft air gun.
• Always store this soft air gun in a secure location.
SPECIFICATIONS
PERFORMANCE:
Many factors affect velocity and accuracy including ammunition type, weight of projectile, barrel
condition, indoor/outdoor shooting and temperature.
Mechanism/Action Electronic
Caliber/Ammunition 6mm plastic BBs
BB capacity
(both VFS and gun)
Up to 250 plastic BBs
Weight 13.6 oz. (.39 kg)
Overall Length 10.5 in (26.67 cm)
Sights Front Aperture
Rear Notch
Barrel Length 3.5 in (8.89 cm)
Barrel Material Smooth bore, aluminum
Safety Thumb Safety
Velocity Up to 175 fps (53.53 m/s)
REPAIR SERVICE
If your soft air gun needs repair, we recommend that you call Crosman Corporation Customer service at
1-800-724-7486 or 585-657-6161. (International customers should contact their distributor.) DO NOT
ATTEMPT TO DISASSEMBLE IT! Your soft air gun requires special tools and fixtures to repair it. If you
take it apart you probably will not be able to reassemble it correctly. Crosman assumes no warranty
responsibility under such circumstances.
LIMITED 30-DAY WARRANTY
This product is warranted to the retail consumer for 30 days from date of retail purchase against
defects in material and workmanship and is transferable.
WHAT IS COVERED
Replacement parts and labor. Transportation charges to consumer for repaired product.
WHAT IS NOT COVERED
Transportationcharges to Crosman for defectiveproduct.Damages caused by abuse, modicationorfailureto
performnormal maintenance- see Step 6. Anyotherexpense. CONSEQUENTIAL DAMAGES,INCIDEN-
TAL DAMAGES, OR INCIDENTAL EXPENSES, INCLUDINGDAMAGETOPROPERTY.SOMESTATES
DONOTALLOWTHE EXCLUSIONORLIMITATIONOFINCIDENTAL OR CONSEQUENTIAL DAMAGES,
SOTHEABOVELIMITATION OR EXCLUSIONMAY NOTAPPLY TOYOU.
WARRANTY CLAIMS
USA Customers: Attach your name, address, description of problem, phone number and copy of
salesreceipt to product. Packageand returnto CrosmanCorporation,Rts. 5 & 20, E.Bloomeld,NY 14443.
Canadian Customers: Follow packaging procedures above and send to Crosman Parts & Service
Depot, 611 Neal Drive, Peterborough, Ontario, K9J 6X7 Canada.
International Customers: Please return product to your nearest distributor. If you do not know your
distributor, please call 585-657-6161 and ask for our International Department for assistance.
IMPLIED WARRANTIES
ANY IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FORA PARTICULAR PURPOSE,ARE LIMITED IN DURATION TO 30 DAYS FROM
DATE OF RETAIL PURCHASE. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONGAN
IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
To the extent any provision of this warranty is prohibited by federal, state, or municipal law which cannot
be preempted, it shall not be applicable. This warranty gives you specific legal rights, and you may also
have other rights which vary from state to state.
CROSMAN is a registered trademark of Crosman Corporation in the United States.
1. Learning the Parts of Your New Soft Air Gun.
Learning the names of the parts of your new soft air gun will help you to understand your owner's
manual. Use this manual to increase your enjoyment of this soft air gun.
2. Installing the batteries
• The Pulse M70 is run on 4 AA batteries (not included).
• To install the batteries, locate the battery cover on the bottom of the grip frame.
• Slide the cover lock forward and pull cover open.
• Insert 4 AA batteries as shown on the reverse side of the battery cover.
• Close battery cover, push down and slide cover lock back into place.
3. Operating the Safety
3.1 To Put the Soft Air Gun "ON SAFE":
• This soft air gun is always "ON SAFE", unless safety is held in the fire position.
• The safety is located above the trigger and grip frame (Fig.2)
Even when the safety is "On Safe", you should continue to handle the soft air gun safely. Do not ever point
the soft air gun at anything you do not intend to shoot.
3.2 To take the Soft Air Gun "OFF SAFE":
• Locate the safety above the trigger and grip frame (Fig. 2).
• Using your thumb, pull down and rotate in clockwise direction
until safety is pointed to fire position. This soft air gun is in the
“O Safe” position and is ready to fire.
You must continue to hold the safety in the “Off Safe” position
while shooting.
4. Loading and Unloading Plastic BBs
4.1 Loading Plastic BBs
• Make sure the soft air gun is "On Safe" (See Step 3.1).
• Point the soft air gun in a SAFE DIRECTION.
• Attach the vertical feed system to the top of the gun, by placing the funnel into the reservoir of the
soft air gun and snapping the vertical feed system into place.
• If you have connected the vertical feed system to the top of the gun correctly, when you load the
port, the BBs will fall into the reservoir of the soft air gun.
4.2 Unloading the Plastic BBs
• Make sure the soft air gun is "On Safe" (See Step 3.1), and pointed in a SAFE DIRECTION.
• Remove vertical feed system by pulling upwards while holding the soft air gun stationary; the BBs
will fall out of the funnel hole at the bottom.
• Turn the soft air gun upside down.
• Gently shake until all plastic BBs have been emptied.
Keep the soft air gun in the "ON SAFE" position until you are actually ready
to shoot. Then push the safety to the "OFF SAFE" position.
WARNING:
Safety
Grip
Frame
Battery Cover
Trigger
Trigger
Frame
Barrel
Muzzle
Muzzle
Plug
Fig. 1
Fig. 2
Use .24 caliber (6 mm) plastic BBs only in this soft air gun. Use of any other
ammunition can cause injury to you or damage to the soft air gun.
Never assume that because the soft air gun no longer fires a plastic BB
and/or the magazine is removed, that a plastic BB is not lodged in the barrel. Always treat the
soft air gun as though it is loaded and with the same respect you would a firearm.
Fig. 4a
Fig. 4b
Fig. 3
5. Aiming and Firing Safely
You and others with you should always wear shooting glasses to protect your eyes.
Always point your soft air gun in a SAFE DIRECTION.
When you are sure of your target and backstop and the area around the target is clear, take
"Off Safe" (See Step 3.2) and remove muzzle plug.
While holding the safety in the Off Safe position, aim the gun and pull the trigger.
Note: The safety must be held in position for the soft air gun to fire.
Your soft air gun is fully automatic. While holding the safety in the Off Safe position,
squeeze and hold the trigger for continuous fire.
Your soft air gun is designed for target shooting and is suited
for both indoor and outdoor use. Always remember to place
your target carefully. THINK about what you will hit if you miss
the target.
The soft air gun is correctly aimed when the blade in the front
aperture sight is positioned exactly in the notch of the rear
sight. The bulls-eye should appear to rest on the top of the
front sight (Fig. 6).
Fig. 6
WARNING:
WARNING:
WARNING:
WARNING:
Do not brandish or display this soft air gun in public – it may confuse people
and may be a crime. Police and others may think it is a firearm. Do not change
the coloration and markings to make it look more like a firearm. That is dangerous and may be a crime.
• Pull back on the reservoir slide on the actual soft air gun (Fig. 3).
• Load plastic BBs into the vertical feed system port (Fig. 4a and b).
• Continue to load until both soft air gun reservoir and vertical feed system are full
(maximum 250 plastic BBs).
1-800-724-7486
SAPM70A515
Vertical Feed System
Port
Rear Sight
Front
Sight
Vertical Feed System

Summary of content (3 pages)