User's Manual
Table Of Contents
- Basic health and safety instructions
- The optional coaxial light feature
- Contents
- Figures
- Tables
- Introduction
- Installation
- How to use the Authenticator CF
- Maintenance
- Problems and Corrections
- Customer Care and Contact Information
- Product Warranty
- Index
3-6 D S C A N
®
AUTHENTICATOR CF™ User Manual v2.1
How to use the Authenticator CF
Warning
Do not look directly into the lights of the document contact area. Maintain a required
minimum distance of not less than 11.8 inches (0.3 m).
2 A short acoustic signal indicates that the document is in the correct position.
The processing starts automatically.
• A processing bar (2) is shown at the bottom and the processing light (3) is
yellow. The yellow processing light indicates that the data were recorded and
are being processed.
Figure 3.6
Processing information
Note
Do not move the document until the yellow processing light turns off.
• When the document reader has completed processing the document, the
processing light turns off, the green operation light comes on and a short
acoustic signal occurs.
• Now you can remove the document.
Figure 3.7
Overview data page
2
3
4
5
6