User's Manual
Table Of Contents
- Basic health and safety instructions
- The optional coaxial light feature
- Contents
- Figures
- Tables
- Introduction
- Installation
- How to use the Authenticator CF
- Maintenance
- Problems and Corrections
- Customer Care and Contact Information
- Product Warranty
- Index
3-8 D S C A N
®
AUTHENTICATOR CF™ User Manual v2.1
How to use the Authenticator CF
The camera pictures page
The Camera pictures page shows all available images captured under different
illuminations depending on the features installed in the document reader. The left
upper image is the Master image. It allows the operator to mark an area of interest
with the mouse cursor.
To mark an area:
1 Move the cursor to the desired position and click the left mouse button.
2 Keep the left mouse button pressed and draw a frame (1).
• The dimensions of the frame will be proportional to the length and width of
the image.
• The content of the frame applies to all displayed images on the screen as an
zoomed detail.
3 Move the cursor into the frame, then press and hold the left mouse button to
move the frame to any place within the image.
4 All other images on the page adjust to the moved frame.
5 Click the right mouse button to delete the frame.
Figure 3.9
Camera pictures page
1