User's Manual

Table Of Contents

3-6 D SCAN

AUTHENTICATOR User Manual v1.0

Figure 3.7

Overview data page

All data submitted to the computer are displayed on the computer screen.

• The upper part (4) shows the captured visible data, printed on the document.

• The lower part (5) shows the chip data stored on the RFID tag. This allows you to compare both

data sections manually.

• An optional status icon (6) is shown on the right side.and indicates the operator quality checking

information. This option can be disabled or enabled on the Options page. See “Global result

settings” on page 3-11 for more information.

In the event of errors, failed verifications, or if the processed document is not recognized, the failed

icon (7) appears.

• Use the Clear Display (8) button to clear the displayed data.

• Repeat the operation with the same document to make sure that the problem was not caused by

mispositioning the document. Lift the document up and adjust the placement.