User's Manual

4-2 D SCAN
®
AUTHENTICATOR User Manual v1.0
To remove smudges, finger prints or other dirt, and grime:
1 Use a damp, soft, lint-free cloth.
2 Wipe the case.
3 Allow the outside surface to dry before the capture process is started.
Warning
Before you clean the case, disconnect the D SCAN Authenticator from the grounded outlet.
D SCAN AUTHENTICATOR specifications
Supplies
To order supplies for your D SCAN Authenticator, call Cross Match Technologies for price
information.
Table 4.1 Product specifications
Item Specification
Resolution 500 ppi
Sensor 5 MP CMOS RGB 24 bit Color
Illumination White light, UV light, IR LEDs
Image type RAW, BMP, JPG
Document support field
size
5.4 in x 3.8 in (137 mm x 92 mm), document
thickness is not limited
Active scanning area
(WxD)
4.9 in x 3.5 in (125 mm x 88mm)
Document thickness Not limited
RFID reader Reading and writing contactless ICs according to
ISO 14443 Type A and B, all standardized rates up
to 848 Kbps
Smart card reader
(optional)
ISO 7816 Class A, AB and C, ISO 7816 & EMV2
2000 Lev
Mag Stripe reader
(optional)
Track 1, 2 and 3 stripes according to related ISO,
ANSI and AAMVA standards
Reading protocols ICAO Doc 9303 chips with LDS 1.7, CAC Cards
Crypto protocols PA, AA, BAC EAC1.2, SAC (PACE)
Operating temperature 41 °F to 113 °F (+5 °C to +45 °C)
Humidity range 0 - 95% relative humidity
Dimensions (W x D x H) 7.5 in x 7.0 in x 5.0 in (190 mm x 178 mm x 128
mm)
Weight 2.4 lbs (1.1 kg), excluding cables and power pack
Data interface High Speed USB 2.0, shielded cable
External interface USB Hub with 2x High Speed USB 2.0 connections
Power supply Wide range power pack, input AC 100-240 V, 50/
60 Hz / 1.7 A, output DC 12 V / 5 A
Protection class IP 43 * (IP 53 for optical channel)
* when Mag Stripe and Smart Card reader slots
are sealed with available caps
Regulatory FCC, CE