User's Manual

6 Verifier
®
Sentry Operator Manual 870391 V1.0
IntroductionDescription
The front of the
Figure 1 The front of the Sentry
The front of the Sentry contains the features that allow the operator to monitor the state of the device. The following
table describes the features.
Table 5 The front of the Sentry
Description
1
The finger is pressed on the platen surface to capture the fingerprint.
2
The speaker.
3
The Capacitive Touch Screen is sensitive to contact by a finger or a capacitive stylus.
4
When the battery accepts a charge, the Charge indicator illuminates.
• A Red light indicates 500 mA of electricity is supplied to the Sentry. This current the amount required to
operate the Sentry, but less than the amount required to charge the Sentry.
• An Amber light indicates 1500 mA of electricity is supplied to the Sentry.
• A Green light indicates the Sentry is supplied the correct amount of electricity by the Docking Station.
This arrangement allows the device to operate and accept the fastest rate of charge.
5
The microphone.
6
The Status indicator. The Android hardware API controls this LED.
1
5
2
3
4
6