User's Manual

15
Use the Sentry
3 The Sentry scans the card and the application displays the data from the card on
the screen. If the scanner does not read the card, a message appears. The
workflow requires the operator to verify the fingerprint.
4 Touch the Verify Fingerprint button. The Fingerprint Capture window appears
5 Tell the person to press the correct finger on the platen of the Sentry. The
fingerprint appears in the window. The Sentry captures the fingerprint and the
application compares the fingerprint to the fingerprint stored on the card.
If the fingerprint matches, a green line appears above and below the fingerprint
and a message appears in the window.
If the fingerprint does not match, a red line above and below the fingerprint and
a message appears in the window.
6 Take the action required by the procedures for the organization.