Technical Manual

Technical Manual AM Systems
AM operating principle v4.4 Page 14 of 72
Figure 3: Correcting the delay time of system B
Figure 4 shows two AM systems that are properly synchronized.
Figure 4: Two AM systems properly synchronized
The synchronization can be performed by making use of Cross Point’s software. The
exact synchronization procedures are described in chapter 8.7.5.2.
Transmission burst
Receiver window
Reference window
20ms
0ms
Transmission burst
Receiver window
Reference window
System A
System B
50Hz mode
Transmission burst
Receiver window
Reference window
20ms
0ms
Transmission burst
Receiver window
Reference window
System A
System B
50Hz mode