Technical Manual

Technical Manual AM Systems
Connections v4.4 Page 30 of 72
6.10.2 Transceiver - receiver cable connections
When an AM receiver is combined with an AM transceiver, the receiver must be
connected to the transceiver with the receiver cable. Figure 15 shows the transceiver to
receiver cable connections.
Figure 15: Receiver cable connections
Make sure that the shielding of the wire is only connected on the
receiver side, NOT on the transceiver side!
TRANSCEIVER SIDE
(shielding not connected!)
green
yellow
shield
blue
red
RECEIVER SIDE
green
yellow
shield
blue
red