Technical Manual

Technical Manual AM Systems
Connections v4.4 Page 32 of 72
6.11 The AM Receiver (RX)
The AM Receiver can be connected to the AM Transceiver to enhance the detection
range. All information and events are stored on the transceiver, not on the receiver board
itself.
6.11.1 AM Receiver Printed Circuit Board
Figure 17 shows the RX PCB and its available components.
Figure 17: The AM RX Printed Circuit Board
RX PCB Components 6.11.1.1
Table 4 shows the AM RX components and a description of their function.
Component
Function
ANT BOT
Bottom receiver antenna loop
ANT TOP
Top receiver antenna loop
BAT
Backup battery for internal
clock.
VIS COUNT
BAT
RESET
D7 D8
BUS A
BUS B
TAMPER
POWER
BUS A1
BUS B1
ANT TOP
ANT BOT
TERM