Technical Manual

Technical Manual AM Systems
Cross Point Device Explorer v4.4 Page 46 of 72
The Mute button enables you to switch off all buzzers on all devices at once. This is
useful when you are configuring the system and don’t want any loud alarms.
8.7.2 Main menu
The Main menu lets you quickly navigate to the other available sections of the Device
Explorer:
x System – refer to paragraph 8.8 for further details
x Access Point – refer to the Cross Point Device Explorer manual for further
details
8.7.3 3D antenna view
The 3D view shows the AM antennas that have been either automatically arranged or
manually inserted in the selected entrance.
When entering the Entrance page, the Normal view is activated by default and various
options for the selected entrance are available through the Entrance button bar.
Dependent of the selected button, the sub-buttons on the right of the Button bar will vary.
Paragraph 8.9 explains the various buttons available in the button bar.
Normal view 8.7.3.1
Click this button to return to the normal 3D front view.
Figure 33: Normal view
Perspective view 8.7.3.2
Click this button to change the 3D view into a perspective view, to be able to quickly
navigate to a specific aisle or antenna, especially useful for large installations.