Technical Manual

Technical Manual AM Systems
Cross Point Device Explorer v4.4 Page 48 of 72
Entrance arrange view 8.7.3.4
Click this button if you want to make any changes to the antenna arrangement or other
entrance and antenna related properties.
Figure 36: Entrance arrangement mode
In the Main menu, an extra entrance named “Unarranged” appears. If any antennas could
not be automatically arranged or extra antennas are added after automatic antenna
arrangement was performed, these antennas are automatically added to the Unarranged
entrance.
You can now either start the automatic antenna arrangement by clicking the
Automatically arrange all antennas button in the button bar or drag & drop antennas
manually from the Unarranged entrance into the appropriate entrance.
Antennas can be picked up by clicking on the antenna image and moving the antenna
while keeping your left mouse button pressed. Move the antenna over the name of the
destination entrance and you will see the plus-sign appear. To place the antenna in
that entrance, just release the left louse button.
In the same way, antennas can also be swapped to another position within the same
entrance. Visitor counters will be enabled or disabled automatically dependent of the
position of the moved antenna in relation to the other antennas.
To select and move multiple antennas at once, keep the Ctrl button on your keyboard
pressed while selecting the required antennas. After selecting all antennas, release the
Ctrl key and drag & drop the antennas in the desired entrance.
In case antenna positions collide with the actual connection of the antennas (A- and B-
sides), a notification panel for each antenna will appear indicating the potential error.
Each antenna can be inverted by a right mouse click on the antenna and enabling or
disabling the option “A & B swapped”.
The names of the antennas, aisles and entrances can be changed by clicking on the
name and entering the new name. Just click somewhere outside of the text input field to
apply the new value.