Technical Manual

Technical Manual AM Systems
Cross Point Device Explorer v4.4 Page 52 of 72
Other notifications 8.7.4.1.3
Notification
Explanation
Default notification
Enable this notification if you want to visualize that the antenna
is switched on. For example the green LED can be switched on
infinite to show the visitor that the system is active.
Tamper
alarm
When a tamper sensor is connected to the transceiver board, a
notification can be triggered when the cover of the antenna is
removed without authorization.
Detection disabled
Tag detection can be temporarily disabled (through one of the
available I/O’s). Set this notification to indicate when tag
detection has been disabled.
System jammed
Set this notification to notify store employees in case the
system is being jammed with a jamming device or as a result of
another high noise source.
Table 7: Other notifications
Saving notification settings 8.7.4.1.4
Notification settings can be saved for usage in other entrances or stores. Click the Load
and save notifications button and select the option ‘Save notifications’ from the menu
and the Save notifications dialog opens.
Figure 39: Save notifications
A list with pre-defined notifications that have previously been saved appears. Select one
from the list to overwrite the selected pre-defined notification, or enter a new name and
description for the new notification.