Technical Manual

Technical Manual AM Systems
Cross Point Device Explorer v4.4 Page 59 of 72
Temporarily disabling other device bursts 8.7.5.2.1
When you start synchronizing entrance(s), start by selecting the Synchronization page of
the first device. It is very useful to switch the transmission bursts of all other entrances
off, so you can determine if there are any other AM systems in the area, to which you
must synchronize your system.
To switch the transmission bursts of the other devices off, select the Automatic
synchronization button to unfold a list of all other available devices.
Click on the green checkmark in front of the device name to disable the transmission
burst of that device. The disabled icon will appear, indicating the transmission burst for
that device is switched off. Click this icon again to switch the burst on again.
When you leave the Synchronization page, all disabled devices will automatically start
bursting again.