Installation Manual
Table Of Contents
- About This Document
- 1 Introduction
- 2 Quick Start for the OEM Kit Users
- 3 Product Overview
- 4 IRIS OEM Reference Board
- 5 Power
- 6 Radios
- 7 Antennas
- 8 Flash Data Logger and Serial ID Chip
- 9 Atmega1281 Fuses
- 10 Sensor Boards & Expansion Connectors
- 11 USB Programming Pod
- 12 Appendix A. Warranty and Support Information
IRIS OEM Edition Hardware Reference Manual
Doc. # 7430-0549-01 Rev. B Page 27
The OEM Edition module is well suited for embedded antenna designs. Proper care must be
taken in the design phase to account for packaging effects due to the enclosure, metallic parts
adjacent to the antenna, and placement on the PCB. In addition, the final application and
expected performance should be evaluated for suitable antenna choice. For an example of
embedded antenna design, Refer to the application note on “Antenna Design Considerations”.