Installation Guide

CROSS CRETE

CODE: AM013

DESCRIPTION:

CROSSCO – CROSS CRETE uses include cleaning brick, etching concrete, thin

set and grout removal without damaging ceramic tile surface. Can be diluted

with water.

RECOMMENDED

USES:

CROSSCO – CROSS CRETE powerful acid cleaner for cleaning and removing

excess cement from: Ceramic Fixtures, Quarry Tiles, Bathrrom Tiles, Ceramic,

Raillings, Windos & Frames, other acid resistant surfaces. Specially

formulated for the removal of new and old concrete residues. It is the same

chemical as phosphoric Acid but with a milder reaction.

PRODUCT CHARACTERISTICS

Muriatic Acid (HCl), %wt 20% To 22%

Specific Gravity @ 60 Deg 1.16 To 1.167

Appearance 1.16 To 1.167

Color, APHA 10 Maximum

Baume Grades 18 - 20

PHYSICAL PROPERTIES

#/Gallon 9.60

Flash Point N/A

Appearance & Odor Colorless to slightly yellow liquid. No odor.

Physical State Liquid

Stability Stable

Conditions to Avoid Reacts exothermically with water.

Incompatibility Oxidizers, metals, alkalis, cyanides

Hazardous Decomposition Reacts with metals to form hydrogen gas.

Polymerization - Conditions to Avoid Will not occur-None.

Unusual Fire & Explosion Hazards Cool containers exposed to intense heat

with water to prevent container rupture.

Reacts violently with water.

CONCRETE REMOVER

•Concrete Remover

•Cleans Concrete

•Efflorescence remover

•Fast Acting Formula

ADVANTAGES:

PAGE 1
CONCRETE REMOVER CROSS CRETE CODE: AM013 DESCRIPTION: CROSSCO – CROSS CRETE powerful acid cleaner for cleaning and removing excess cement from: Ceramic Fixtures, Quarry Tiles, Bathrrom Tiles, Ceramic, Raillings, Windos & Frames, other acid resistant surfaces. Specially formulated for the removal of new and old concrete residues. It is the same chemical as phosphoric Acid but with a milder reaction.
PAGE 2
CROSS CRETE GENERAL PRODUCT INFORMATION SPECIFICATIONS SAFETY INFORMATION Directions for working with CROSS CRETE: Wear protective clothing, rubber gloves and plastic safety glasses while using. Keep acid away from other chemicals, and never mix acid with any other chemicals. Mixed with Chlorine, and you can create a very dangerous mustard gas. Muriatic acid must be used with EXTREME CAUTION!! Contact with the eyes, for example, can cause irreversible damage and permanent blindness.