SDS

ManualsBrandsCrossco ManualsCleaning128 oz. Concrete and Cement Cleaner

M A T E R I A L S A F E T Y D A T A S H E E T

Page: 1

CROSSCRETE

11/21/2011

PRODUCT NAME: CROSSCRETE HMIS CODES: H F R P

PRODUCT CODE: AM013 3 0 0 C

================== SECTION I - MANUFACTURER IDENTIFICATION =================

MANUFACTURER'S NAME: MAX CHEMICAL INC

ADDRESS : PO BOX 363841

SAN JUAN PR 00936-3841

EMERGENCY PHONE : DATE PRINTED : 11/21/2011

INFORMATION PHONE : 787-765-6100 NAME OF PREPARER : MAX CHEMICAL, INC

========== SECTION II - HAZARDOUS INGREDIENTS/SARA III INFORMATION =========

VAPOR PRESSURE

REPORTABLE COMPONENTS CAS NUMBER mm Hg @ TEMP % WT

------------------------------------------------------------------------------------------------------------------------------------

* Hydrogen Chloride 7647-01-0 78 mmHg 20 C 49.83

HCl OSHA CLV 5PPM; 7MG/M3

ACGIH CLV 2PPM

PHOSPHORIC ACID 007664-38-2 0.03MMHG 20C 14.61

NONYLPHENOL ETHOXYLATE 9016-45-9 <0.075 .83

TWA OEL SHORT TERM OE-RL:PPMA, MG/M3B, PPMA, MG/M3B

BLEND MIXTURE N/D N/D .17

COMPLEX SUBSTITUTED KETO-AMINE/ 143106-84-7/ 50-60%

HYDROCHLORIC ACID/ 07647-01-0/ 0-3%

ISOPROPYL ALCOHOL/ 00067-63-0/ 1-10%

PROPARGYL ALCOHOL/ 00107-19-7/ 1-10%

+ Indicates a product that is considered hazardous material under the OSHA Hazardous Comunication Standard ( 29 CFR

1910.1200).

* Indicates Toxic Chemical(s) subject to reporting requirements of section 313 of Title III of CFR 372.

=============== SECTION III - PHYSICAL/CHEMICAL CHARACTERISTICS ============

BOILING RANGE: 150-230 F - 158C SPECIFIC GRAVITY (H2O=1): 1.16

VAPOR DENSITY: 1.27 (Air=1) EVAPORATION RATE: (Butyl Acetate=1)

<1.00

COATING V.O.C.: 9.16 lb/gl MATERIAL V.O.C.: 0.01 lb/gl

SOLUBILITY IN WATER: SOLUBLE

APPEARANCE AND ODOR: CLEAR, COLORLESS LIQUID WITH PUNGENT, IRRITATING ODOR.

================= SECTION IV - FIRE AND EXPLOSION HAZARD DATA ==============

FLASH POINT: 20C METHOD USED: TCC

FLAMMABLE LIMITS IN AIR BY VOLUME- LOWER: n/a UPPER: n/a

EXTINGUISHING MEDIA: Nonflammable, use agent suitable for surrounding fire

SPECIAL FIREFIGHTING PROCEDURES

Approach fire from upwind to avoid hazardous vapors. Use flooding quantities of water as fog or spray to keep fire-

exposed containers cool. Extinguish fire using agent suitable for surrounding fire.

Firefighters should wear chemical protective suit with self contained positive-pressure breathing apparatus.

Summary of content (4 pages)

PAGE 1
M A T E R I A L S A F E T Y D A T A S H E E T CROSSCRETE Page: 1 11/21/2011 PRODUCT NAME: CROSSCRETE PRODUCT CODE: AM013 ================== HMIS CODES: H F R P 3 0 0 C SECTION I - MANUFACTURER IDENTIFICATION ================= MANUFACTURER'S NAME: MAX CHEMICAL INC ADDRESS : PO BOX 363841 SAN JUAN PR 00936-3841 EMERGENCY PHONE INFORMATION PHONE ========== : : 787-765-6100 SECTION II - DATE PRINTED : 11/21/2011 NAME OF PREPARER : MAX CHEMICAL, INC HAZARDOUS INGREDIENTS/SARA III INFORMATION
PAGE 2
M A T E R I A L S A F E T Y D A T A S H E E T CROSSCRETE Page: 2 11/21/2011 UNUSUAL FIRE AND EXPLOSION HAZARDS None ======================== SECTION V - REACTIVITY DATA ======================= STABILITY: STABLE CONDITIONS TO AVOID Contact with strong bases can cause violent reaction generating large amounts of heat.
PAGE 3
M A T E R I A L S A F E T Y D A T A S H E E T CROSSCRETE Page: 3 11/21/2011 MEDICAL CONDITIONS GENERALLY AGGRAVATED BY EXPOSURE ASTHMA, BRONCHITIS, EMPHYSEMA AND OTHER LUNG CONDITIONS AND CHRONIC NOSE, SINUS OR THROAT CONDITIONS. EXPOSURE MAY AGGRAVATE EXISTING SKIN AND/OR EYE CONDITIONS ON CONTACT. EMERGENCY AND FIRST AID PROCEDURES IF BREATHED: REMOVE TO FRESH AIR. IF IN EYES: IN CASE OF EYE CONTACT, FLUSH WITH LARGE AMOUNTS OF WATER FOR AT LEAST 15 MINUTES.
PAGE 4
M A T E R I A L S A F E T Y D A T A S H E E T CROSSCRETE Page: 4 11/21/2011 PROTECTIVE EQUIPMENT AND CLOTHING SHOULD BE SELECTED, USED, AND MAINTAINED ACCORDING TO APPLICABLE STANDARDS AND REGULATIONS. WORK/HYGIENIC PRACTICES EYEWASHES AND SAFETY SHOWERS IN THE WORKPLACE IS RECOMMENDED.