Installation Guide

CROSSHINE

CODE: CK223

DESCRIPTION:

CROSSCO – CROSSHINE is excellent for use on Vinyl, Vinyl Composition,

Asphalt, Rubber, Concrete, Flagstone, Brick, Terrazzo, Sealed Wood floors.

Designed for low or high maintenance floor care programs.

RECOMMENDED

USES:

CROSSCO – CROSSHINE (3th step) protects and embellishes all type of floors,

leaving perfect finishing for terrazzo, ceramic, cork, wood, linoleum, vinyl,

rubber, asphalt and floors of parquet. An excellent product for damp

mopping and spray buffing with any speed buffing machine. Dries to a hard

durable finish.

PRODUCT CHARACTERISTICS

Solids………………….…… 18.0 ± 0.5%

Color………………………..Milky White

Odor………………………..Mild

pH …………………………..8.5 – 9

Viscosity ………………….Water thin

Gloss ……………………...90+ specular

Leveling ………………….Excellent

Buffabiliyu ………….....Spray Buff or Restorer

HIGH GLOSS ACRYLIC FLOOR FINISH

•High gloss finish

•Could be used without sealer

•Detergent resistant

•Moderate to high traffic coat

•Self leveling

•Easy to apply

ADVANTAGES:

Dry/Recoat time….……….30 min

Detergency …………………..Excellent

Waterspot Resistance..….Excellent

VOC………………………………0.31 lbs/gal

Coverage………….…………..2500 s.f./gal +/-

Storage/Stability …………..2 years

Weight per Gallon ………..8.90 lbs./gal.

Freeze / Thaw Stability .. Keep from freezing

PAGE 1
HIGH GLOSS ACRYLIC FLOOR FINISH CROSSHINE CODE: CK223 DESCRIPTION: CROSSCO – CROSSHINE (3th step) protects and embellishes all type of floors, leaving perfect finishing for terrazzo, ceramic, cork, wood, linoleum, vinyl, rubber, asphalt and floors of parquet. An excellent product for damp mopping and spray buffing with any speed buffing machine. Dries to a hard durable finish.
PAGE 2
CROSSHINE GENERAL PRODUCT INFORMATION FOR USE - Vinyl Tile - Asphalt Tile - Rubber Tile - Flagstone - Ceramic Tile - Vinyl Asbestos - Linoleum - Concrete - Terrazzo DIRECTIONS PREPARATION: If stripping is necessary, use CROSSCO WAXEX stripper and follow directions accordingly. If floor is in good condition and stripping is not necessary, sweep up excess dirt and dust and then clean with a good quality cleaner to remove dirt and oils. Follow with a thorough rinsing and allow to dry completely.