Instructions / Assembly

WAXEX

CODE: DE049

DESCRIPTION

Crossco Waxex an effective floo finish emulsifier "stripper "that provides

unmatched results. Will solubilize ageds and built up finishes almost

instantly. May used as a non scrub stripper.

USES Crossco Waxex was developed to penetrate and remove multiples coats

of burnished floor finish with minimum labor. This powerful professional

stripper actually "unlock" the Chemical bonds of acrylic and urethane

fortifed floor finishes. For use in Vinyl tile,Flagstone, Vinyl Asbestos, Linoleum

Concrete and Terrazo.

ADVANTAGES *aggressive finish remover *non-amoniated

*penetrating power *no harsh odors

*low foaming *easy rinse formula

PRODUCT CHARACTERISTIC

Appearance………………………

Liquid Viscosity ……………….. Water thin

Color…………. Purple Application Rate……………… sq.ft.

Solid/Weight …………… 28% +/- 1%

8.0 % +/-1% Weight/Gal ………………. 8.27 lbs +/-

Solubility………. Soluble Storage/Stability:………………… 2 yrs.

Drying Time: sticky consistency pH:……………………………… 10.5-11.5

PAGE 1
WAXEX CODE: DE049 DESCRIPTION Crossco Waxex an effective floo finish emulsifier "stripper "that provides unmatched results. Will solubilize ageds and built up finishes almost instantly. May used as a non scrub stripper. USES Crossco Waxex was developed to penetrate and remove multiples coats of burnished floor finish with minimum labor. This powerful professional stripper actually "unlock" the Chemical bonds of acrylic and urethane fortifed floor finishes.
PAGE 2
APPLICATION The desired concentration will depend on the build-up and age of the polish film. As a starting point dilute with cold water as follows: For Avarage Build Ups-Dilute 1 to 3 with cold water. For Moderate Build Ups-Dilute 1 to 2 with cold water. For Heavy Build Ups- Dilute 1 to 1 with cold water. Mop a generous solution onto the floor to be stripped. Allow solution to stand about 5 minutes keeping the floor wet at all times.
PAGE 3