SDS

Safety Data Sheet
Crossco Genuine Coat/Saltillo Sealer
SDS Revision Date:
05/19/2015
Page 3 of 7
6. Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
Put on appropriate personal protective equipment (see section 8).
6.2. Environmental precautions
Do not allow spills to enter drains or waterways.
Use good personal hygiene practices. Wash hands before eating, drinking, smoking or using toilet. Promptly remove
soiled clothing and wash thoroughly before reuse.
6.3. Methods and material for containment and cleaning up
Contain spills immediately with inert materials (sand, earth). Transfer liquids and solid diking material to separate
suitable containers for recovery or disposal. Keep spills and cleaning runoff out of municipal sewers and bodies of
water.
7. Handling and storage
7.1. Precautions for safe handling
No information provided
7.2. Conditions for safe storage, including any incompatibilities
Minimal storage temperature is 1c and the maximum is 60c. Keep from freezing. Do not store this material near food,
feed or drinking water.
Incompatible materials: No data available.
7.3. Specific end use(s)
No data available.
8. Exposure controls and personal protection
There are no ingredients in this product which are classified as hazardous, and/or no hazardous ingredients
above the GHS cut off percentage.
8.2. Exposure controls
Respiratory
Wear a MSHA/NIOSH approved half mask, air purifying respirator.
Eyes
Safety eyewear with splash guards is recommended to prevent contact.
Skin
Chemically resistant gloves should be worn whenever this material is handling.
Engineering Controls
Use local exhaust with a minimum capture velocity of 100 ft/mm at the point of vapor
evolution.
Other Work Practices
Facilities storing or utilizing this material should be equipped with an eyewash facility. Use
good personal hygiene practices. Wash hands before eating, drinking, smoking or using
toilet. Promptly remove soiled clothing and wash thoroughly before reuse.