Instructions / Assembly

ACRYL - B- 60- A

CODE: PA057

DESCRIPTION

Crosso Acryl-B-60-A is a 100% acrylic polymer emulsions designed for

modifying portland cement and hydraulic cement composition.

A concrete bonding agent and admixture for cement-based materials

and mixes to significatly improves adhesion, cohesion, tensile, compressive

flexural, strengths and mechanical properties. It improves freeze/thraw

stability of Portland cement based products.

USES Important application areas include patching and resurfacing floor,

underlayment, terrazo flooring, stucco, industrial cement floor, highways,

bridge deck repair, etc.

ADVANTAGES *eliminate crack *ready to use

*improves curing *excellent bond

*water resistant *increase strenght

PRODUCT CHARACTERISTIC

Appearance………………………

liquid Viscosity ……………….. 85-10+/-cps

Color…………. white Application Rate……………… sq.ft.

Solid/Weight …………… 28% +/- 1%

46% +/-1% Weight/Gal ………………. 8.5 lbs +/-

Solubility………. Soluble

Drying Time: sticky consistency

PAGE 1
ACRYL - B- 60- A CODE: PA057 DESCRIPTION Crosso Acryl-B-60-A is a 100% acrylic polymer emulsions designed for modifying portland cement and hydraulic cement composition. A concrete bonding agent and admixture for cement-based materials and mixes to significatly improves adhesion, cohesion, tensile, compressive flexural, strengths and mechanical properties. It improves freeze/thraw stability of Portland cement based products.
PAGE 2
APPLICATION Clean the area and remove all loose material and loose concrete and any oil, grease dirty, efflorecense, etc. Mix the cement and the sand. Important the sand is clean and dry. In a bucket mix Crossco Acryl B 60 A and water. Mix the liquid with the cement and sand slowly until you have desired consistency. Apply a little amount of Crossco Acryl B 60 in the repair area. Apply the cement mix before the Crossco Acryl -B -60-A dry. Please don't exceed more then 20 minutes to making the application.
PAGE 3