Installation Guide

PERMA BOND REGULAR

CODE: PB023

DESCRIPTION

Crossco Perma Bond is a plaster to concrete bonding agent ready to use that

provides a permanent bond between structurally sound substrates and

lime plaster. Creates a strong bond between old and new plaster and/or

stucco.

USES Concrete

ADVANTAGES *fast dry *ready to use

*non-toxic *excellent bond

*water clean-up *creates strong bond

PRODUCT CHARACTERISTIC

Appearance………………………

liquid Viscosity ……………….. 95-100

Color…………. blue/white/pink Application Rate……………… 350 sq.ft.

Solid/Weight …………… 28% +/- 1%

1.13 Weight/Gal ………………. 9.05 lbs +/-

Solubility………. Soluble

Drying Time: 2-4 hour

PAGE 1
PERMA BOND REGULAR CODE: PB023 DESCRIPTION Crossco Perma Bond is a plaster to concrete bonding agent ready to use that provides a permanent bond between structurally sound substrates and lime plaster. Creates a strong bond between old and new plaster and/or stucco. USES Concrete ADVANTAGES *fast dry *non-toxic *water clean-up *ready to use *excellent bond *creates strong bond PRODUCT CHARACTERISTIC Appearance……………………… liquid Viscosity ……………….. 95-100 Color…………. Application Rate……………… 350 sq.ft.
PAGE 2
APPLICATION Crossco Perma Bond is ready tu use. Apply a uniform coat of bonding agent to existing surface with brush, roller or airless spray. Make sure all areas are well covered with product. After application, allow 2 to 4 hours to dry before applying plaster/stucco to surface. Trowel on plaster/stucco on a circular motion. If product is left on surface longer than 48 hours, an adittional coat is required. CAUTION Keep out of reach of children.