SDS

ManualsBrandsCrossco ManualsBuilding materials5500 1 Gal. Asphalt Roof Coating Sealer

M A T E R I A L S A F E T Y D A T A S H E E T

Page: 1

CROSSCO 5500

3/21/2013

PRODUCT NAME: CROSSCO 5500 HMIS CODES: H F R P

PRODUCT CODE: RS088 1 0 1 Dopr

================== SECTION I - MANUFACTURER IDENTIFICATION =================

MANUFACTURER'S NAME: MAX CHEMICAL INC

ADDRESS : PO BOX 363841

SAN JUAN PR 00936-3841

EMERGENCY PHONE : DATE PRINTED : 3/21/2013

INFORMATION PHONE : 787-765-6100 NAME OF PREPARER : MAX CHEMICAL, INC

========== SECTION II - HAZARDOUS INGREDIENTS/SARA III INFORMATION =========

VAPOR PRESSURE

REPORTABLE COMPONENTS CAS NUMBER mm Hg @ TEMP % WT

------------------------------------------------------------------------------------------------------------------------------------

ACRILIC POLYMER MIX 17 20C 40.63

ACRYLIC POLYMER/ NOT HAZARDOUS/ 54-56%

RESIDUAL MONOMERS/ NOT REQUIRED/ <500.0 PPM

AQUA AMMONIA/ 1336-21-6/ <=0.2%

WATER/ 7732-18-5/ 44-46%

AQUA AMMONIA:

ROHM AND HAAS: TWA:25PPM

ROHM ANSD HAAS: STEL:35PPM

ACGIH: TWA: 17MG/M3 PPM

ACGHI: STEL: 24MG/M3 35PPM

OSHA_TRANS: PEL: 35MG/M3 50PPM

CALCIUM CARBONATE 1317-65-3 NA NA 33.87

OSHA: PEL=15MG/M3 TOTAL DUST; 5MG/M3 RESPIRABLE

ACGIH TLV=10MG/M3 TOTAL DUST

WATER 7732-18-5 2.3kPa 20C 12.36

TITANIUM DIOXIDE 13463-67-7 NA NA 5.77

ALUMINUM OXIDE/ 1344-28-1/ 0-10%

AMORPHOUS SILICA/ 7631-86-9/0-10%

titanium dioxide: OSHA PEL; TWA 15mg/m3. ACGIH TLV; TWA 10mg/m3

amorphous silica: OSHA PEL; 20mppcf ó 80 mg/m3 % SiO2

* ZINC OXIDE (MIX) 1314-13-2 NA 20C 3.63

ZINC OXIDE/ 1314-13-2/ 99.8%

LEAD/ 7439-92-1/ 0.05%

CADMIUM/ 7440-43-9/ 0.04%

OSHA: PEL=15MG/M3 TOTAL DUST. 5MG/M3 RESPIRABLE (FUME)

ACGIH TLV=10MG/M3 TOTAL DUST. 5MG/M3 RESPIRABLE

PROPYLENE GLYCOL METHYL ETHER ACETATE 57-55-6 0.129 25C 1.11

AIHA WORKPLACE ENVIROMENTAL EXPOSURE LEVEL (WEEL)

VAPOR AND AEROSOL = 50PPM; AEROSOL ONLY = 10MG/M3

ADDITIVE MIX 22.6666 20C .65

ORGANIC ADDICTIVE/ NO CAS # 1-3%

WATER/ 7732-18-5/ 97-99%

ORGANIC ADDITIVE: TWA=0.1MG/M3

2,2,4-TRIMETHYL-1,3-PENTANEDIOL MONO(2-METHYLPROPANOATE 25265-77-4 0.13MBAR 20C .57

DIPERSANT BLEND 17 20C .40

Use local exhaust ventilation with a minimim capture velocity of 100ft/min.

(0.5m/sec) at the point of vapor evolution.

Ethyl Hydroxyethyl Cellulose 9004-58-4 NA NA .37

MIX 0.1 .32

DICHLORO-2-N-OCTYL-4-ISOTHIAZOLIN-3-ONE/ 64359-81-5/ 19.5-20.5%

Summary of content (4 pages)

PAGE 1
M A T E R I A L S A F E T Y D A T A S H E E T CROSSCO 5500 Page: 1 3/21/2013 PRODUCT NAME: CROSSCO 5500 PRODUCT CODE: RS088 ================== HMIS CODES: H F R P 1 0 1 Dopr SECTION I - MANUFACTURER IDENTIFICATION ================= MANUFACTURER'S NAME: MAX CHEMICAL INC ADDRESS : PO BOX 363841 SAN JUAN PR 00936-3841 EMERGENCY PHONE INFORMATION PHONE ========== : : 787-765-6100 SECTION II - DATE PRINTED : 3/21/2013 NAME OF PREPARER : MAX CHEMICAL, INC HAZARDOUS INGREDIENTS/SARA III INFORMAT
PAGE 2
M A T E R I A L S A F E T Y D A T A S H E E T CROSSCO 5500 Page: 2 3/21/2013 PROPYLENE GLYCOL PHENYL ETHER/ 770-35-4/ 79.5-80.5% DIPROPYLENE GLYCOL PHENYL ETHER/ 51730-94-0/ 79.5-80.5% PROPANEDIOL/ 57-55-6/ 79.5-80.5% COPPER STABILIZER/ TRADE SECRET/ 79.5-80.5% Dichloro-2-n-octyl-4-isothiazolin-3-one: ROHM AND HAAS: TWA: 0.06MG/M3 ROHM AND HAAS: STEL: 0.1MG.M3 Propanediol: ROHM AND HAAS: TWA: 175PPM WEEL: TWA Aerosol: 10MG/M3 SOLVENT DEWAXED PARAFFINIC 64742-65-0 N/A N/A .
PAGE 3
M A T E R I A L S A F E T Y D A T A S H E E T CROSSCO 5500 Page: 3 3/21/2013 HAZARDOUS POLYMERIZATION: WILL NOT OCCUR. ==================== SECTION VI - HEALTH HAZARD DATA ======================= INHALATION HEALTH RISKS AND SYMPTOMS OF EXPOSURE IRRITATION OF NOSE, THROAT AND LUNGS. SKIN AND EYE CONTACT HEALTH RISKS AND SYMPTOMS OF EXPOSURE IRRITATION IF NOT PROMPTLY WASHED FROM SKIN. EYE CONTACT: MODERATE IRRITATION.
PAGE 4
M A T E R I A L S A F E T Y D A T A S H E E T CROSSCO 5500 Page: 4 3/21/2013 VENTILATION USE LOCAL EXHAUST WITH A MINIMUM CAPTURE VELOCITY OF 100 FT/MM AT THE POINT OF VAPOR EVOLUTION. PROTECTIVE GLOVES CHEMICALLY RESISTANT GLOVES SHOULD BE WORN WHENEVER THIS MATERIAL IS HANDLING. EYE PROTECTION SAFETY EYEWEAR WITH SPLASHGUARDS ARE RECOMMENDED TO PREVENT CONTACT. OTHER PROTECTIVE CLOTHING OR EQUIPMENT FACILITIES STORING OR UTILIZING THIS MATERIAL SHOULD BE EQUIPPED WITH AN EYEWASH FACILITY.