Instruction manual

Hallett 15xs Instruction Manual
Released on 20-Sept-12 – H800003P Page 26 UV Pure Technologies Inc. © 2012
MAIN MENU
INITIAL SET-UP
MAY TAKE 24HRS..
Alarm Conditon
Exists
Display Active
Alarm message
Self
Diagnostics
Starting
Lamps
Unit Treating
Shutdown unit
NO/YES
You may safely
unplug your unit
Lamp life remain
## hours
Reset Lamp Hours
NO/YES
Unplug unit and
replace UV lamps
Start up
On Standby, Wait
for Remote Start
Net UV TUV Int.
XX-XX% XX-XX%
Service Menu
See Following
Sections
Setup Menu
Hallett 15xs
See Following
Sections
Alarms and
Troubleshooting
See Following
Sections
Message History
See Following
Sections
MAIN MENU
If Enabled - See Setup
Use Up, Down, Left & Right Arrows to
Navigate
Use Right Arrow as Enter.
Use Right Arrow to Change Value
Use Right Arrow to Accept Value
Use Right Arrow to silence audio alarm
Use Left Arrow to Escape to Main
Menu
When a unit is new or the UV lamps have
been replaced and the Lifetime counter has
been reset, the system begins an Initial Set-
up process which may last 24hrs. Continue
to operate unit.