Instruction manual

Hallett 13 & 30 Instruction Manual - Wastewater & Reuse

Please read the complete instruction manual before installing or operating the

Hallett. Retain these instructions and the purchase receipt for the unit.

1. ABOUT THE HALLETT

The Hallett is the world’s only ultraviolet water purification device with patented

Crossfire Technology.

Patented in US 6,707,048, Canada 2,463,503, Australia 2,002,333,084,

Mexico 248805

Patent Pending in Japan, UK, Europe, & Eurasia

UV Pure’s Hallett UV systems employ revolutionary Crossfire Technology that is

self-cleaning, self-monitoring, and fail-safe. The Hallett

system designed with

Crossfire Technology® eliminates the potential risks associated with

conventional single lamp UV systems.

Committed to exceeding the performance of UV systems in the marketplace, UV

Pure’s founder, Ron Hallett, turned conventional technology inside-out by running

the water inside the quartz sleeve and including two lamps mounted in air, dual

smart sensors, elliptical reflectors and an optional fail-safe solenoid valve.

Crossfire Technology is complete UV disinfection: Crossfire Technology

incorporates two proprietary high-output UV lamps, with elliptical reflectors, that

target pathogens with radiation from 360º, to deactivate pathogens and provide

disinfection.

Crossfire Technology is risk-free and fail-safe: Crossfire Technology uses

dual smart UV sensors mounted in air, which cannot foul and are more reliable

indicators of system performance. The lamps are air-cooled and maintain

consistent levels of UV output for maximum pathogen deactivation. Each system

shipped to the North American market is supplied with a Transient Voltage Surge

Suppressor (TVSS)/Surge Protective Device (SPD) that has been certified to the

UL 1449 standard by an NRTL/C and includes integral Over/Under Voltage

shutoff protection.

Crossfire Technology is self-cleaning: Crossfire Technology uses a stainless

steel wiper to clean the inside of the quartz sleeve eliminating quartz fouling. .

The wiper is automated to cycle for 5 minutes every 4 hours. The cycle begins

shortly after power is applied.

Crossfire Technology is virtually maintenance-free: Crossfire technology

utilizes two lamps mounted in air, outside the quartz sleeve so maintaining a

Hallett is as easy as changing a light bulb with no system draining required. The

UV lamps require replacement after 12 months of operation and notification is

given via alarm one month in advance.

Crossfire Technology is easy to install: Crossfire technology employs flexible

stainless steel hoses with Female Iron Pipe (FIP) connections for quick and

simple installation.