Instruction manual

Hallett 13 & 30 Instruction Manual - Wastewater & Reuse

prevent damage (see Draining Instructions). The water temperature range is 1–

38°C (34–100°F). Special Note: Drafts or areas where cold air is blowing on the

system can adversely affect the temperature – make sure the system is free from

cold air currents). If cold room conditions cannot be avoided, the Cold Air Kit

should be installed.

Energy Requirements:

There are two standard operating voltages for the Hallett unit. The unit may be

120Vac or 220-240 Vac. Please refer to the power input label located near the

power cord entry of the unit. See Figure 1B. Record the operating voltage and

serial on the front cover of the manual.

120Vac Models 220-240Vac Model

Hallett 13 – 104W, 1.5A max. 50/60Hz Hallett 13 -108W, 1A max. 50/60Hz

Hallett 30 - 173W, 1.5A max. 50/60Hz Hallett 30 -177W, 1A max. 50/60Hz

UV Pure supplies Transient Voltage Surge Protectors (that have been certified to

UL1449 standard or equivalent that includes integral Over/Under Voltage shutoff

protection) with its Hallett and Upstream models in North America to help protect

against damage from power fluctuation. Those models must be plugged into the

supplied protectors in North America, and into equivalent protectors outside

North America (not supplied with systems in those markets).

UV Pure Technologies’ UV water purification system models are designed to

operate within normal power grid specifications (voltages and frequencies),

worldwide. However power spikes, surges and brownouts are a common

occurrence in all countries. When that happens, line voltages may fluctuate

outside the systems’ operating specifications.

Installation of the supplied TVSS/SPD between the UV system and the power

source will increase the ability of the system to survive transient events on the

AC power. This will help to ensure uninterrupted water treatment and reduce the

risk of costly repairs due to damage from power spikes, surges and brownouts

which are NOT COVERED BY UV PURE TECHNOLOGIES’ Limited Warranty.

Safety Information

GROUNDING

This UV unit must be grounded. In the event of a malfunction or breakdown,

grounding will reduce the risk of electric shock by providing a path of least

resistance for electric current. This unit is equipped with a cord having an

appliance-grounding conductor and a grounding plug. The plug must be plugged

into an appropriate outlet that is installed and grounded in accordance with all

local codes and ordinances. The piping connected to the UV unit must also be

properly grounded. Install a grounding lug or strap as required.

WARNING - Improper connection of the equipment-grounding conductor can

result in a risk of electric shock. Check with a qualified electrician or service

representative if you are in doubt whether the unit is properly grounded. Do not

modify the plug provided with this unit; if it will not fit the outlet, have a proper

outlet installed by a qualified electrician.