User's Manual

CrossFire HP – All-Digital Transport System
User Guide
© SUNWAVE COMMUNICATIONS LIMITED 2015 28 Revision 05
Figure 2-11 WebOMT Homepage
The OMT homepage includes the following buttons, tabs and fields (refer to corresponding numbers in Figure 2-11):
1. Site Info: Includes “Station ID”, “Device ID”, “Dev Type” and “Dev Name” information.
2. ScreenShot: Used for saving the current parameter information and device operating status. When SUNWAVE
assistance is required to troubleshoot the system, send the “ScreenShot” file to the SUNWAVE technicians.
To use the ScreenShot function, follow the procedure below:
a) Select the page that you want to save.
b) Click the ScreenShot button. See
2 in Figure 2-11.
c) Close the popup window after the screen shot has been successfully captured as shown in Figure 2-12.
d) Click the Configuration button. See
6 in Figure 2-11.