User's Manual

CrossFire HP – All-Digital Transport System
User Guide
© SUNWAVE COMMUNICATIONS LIMITED 2015 30 Revision 05
5. Register: This function is not relevant for maintenance activities.
6. Configuration: See Section 7.5 for details.
7. Language: Switches language between English and Chinese. (Other languages are being developed.)
8. Operation interface: Queries status and sets parameters.
9. Online User: Shows the number of users that are currently connected to the OMT and the IP address of each
user’s device.
10. Parameters: Tabs that access pages that display and allow setting of device parameters.
11. Parameter configuration field：Buttons that show/hide the parameter ID number & checkbox and save
configuration parameters. See Section 7.5 for details.
12. Log out: Button that used for logging out.
13. Users: See Section 2.3.3 for details.
2.3.3. Users Management
Figure 2-14 shows the page of user management by clicking Users button on the homepage.
 Note: Users management should be operating on Master AU WebOMT only.
 Note: Only admin account has the authority to do users management.
Figure 2-14 Users Management
1) Add user account
a) Enter the new username. See 1 in the Figure 2-15.
b) Enter the password and confirm. See 2 in the Figure 2-15.
c) Click Add user button.