User's Manual

CrossFire HP – All-Digital Transport System
User Guide
© SUNWAVE COMMUNICATIONS LIMITED 2015 41 Revision 05
Parameter
Description
RD/RW
FTP Username
Username for device to log into FTP Server
RW
FTP Password
Password for device to log into FTP Server
RW
Awaiting Upgrade Filepath
File path (directory) for device to acquire software upgrade file from
FTP Server
RW
Awaiting Upgrade filename
Filename of the awaiting software upgrade file
RW
FTP File Transfer Control
Start /Cancel upgrade
RW
3.7.2. AU Alarms
Table 8 lists the possible alarms on the CrossFire system for the AU.
Table 8 CrossFire Alarms for the AU
Parameter
Description
RD/RW
Power Interruption Alarm
Electrical supply failure
RD
Battery Failure Alarm
Standby battery failure
RD
MOV Alarm
Device has been moved from the original installation location
RD
Open Case Alarm
Alarm when device is open
RD
Over-temperature Alarm
Device temperature is over the rated temperature threshold
RD
DPLL Unlocked Alarm
Digital phase lock loop unlocked
RD
LO1~4 Unlocked Alarm
Local oscillation unlocked
RD
CH1~4 ALC Alarm
Alarm when ALC is working
RD
OP1~6 Transceiver Failure Alarm
OP-transceiver unplugged or failure (Port OP1~OP6)
RD
OP-AU1/2 Transceiver Failure Alarm
OP-transceiver unplugged or failure (Port S_AU1/2 )
RD
CH1~4 DL Under Input-power Alarm
Channel 1~4 input power under rated threshold
RD
CH1~4 DL Over Input-power Alarm
Channel 1~4 input power over rated threshold
RD
External Alarm 1~4
External device failure (such as UPS failure)
RD
3.7.3. AU System Info
Table 9 AU: RF Channels 1~4
Parameter
Description
RD/RW
RF Signal Switch
/
RW
UL Attenuation
Range: 0-15dB
RW
DL Attenuation
Range: 0-15dB
RW
DL Under Input-power Threshold
Default value: -30dBm/ Range: -35~ +15dBm
RW
DL Over Input-power Threshold
Default value: 10dBm/ Range: +10~ +30dBm
RW
DL Input-power
/
RD
Bandwidth
/
RD
UL Center Frequency
/
RD
DL Center Frequency
/
RD