User's Manual

CrossFire HP – All-Digital Transport System
User Guide
© SUNWAVE COMMUNICATIONS LIMITED 2015 46 Revision 05
SN
Interface Name
Description
11
GE3
Wi-Fi signals or S1 signals input
12
GE4
Wi-Fi signals or S1 signals input
13
GE5
Wi-Fi signals or S1 signals input
14
GE6
Wi-Fi signals or S1 signals input
15
CONSOLE
Connection for local PC through CAT-5 for local monitoring
16
AP
Connection for WLAN Network adapters for monitoring device through Wi-Fi
17
DEBUG
Connection for local debugging PC through USB wire
18
STATUS
Indicates device operating status
4.3. EU Back Panel
Figure 4-3 shows a schematic of the back panel of the EU and Table 23 lists the interfaces and their functionality.
Figure 4-3 Back Panel of the EU
Table 23 EU Back Panel Interfaces
SN
Interface Name
Description
19
Electrical Power Line Interface
/
20
Grounding
/
4.4. Indicator Description
See Section 3.5 for details.
4.5. OMT Parameters, Alarms and Commands for the EU
See Section 2.3, OMT Display, for information on how to use the WebOMT interface to view and change parameters
s and run commands.